“PAL3” is a compact and light weight phased array UT system that is practical
in every field. The complex array setting is possible with scan pitch, angle
of refraction or focal distance can be easily set up by our original high-speed
processing software. Its animation function allows user to check and visualize
the result of the setting clearly before actual testing begins. By using “PAL3”, the impossible inspections became possible and the usefulness of UT is enhanced
dramatically!
32ch aperture /128ch scanning
Zone focusing
Sector / linear / mix scanning
Phased array pitch and catch within the same array
Total : 100dB
0 ~ 60dB/0.1dB step
0 ~40 dB / 0.1dB step ( share with DAC)
Frequency Range
0.4 to 17MHz (-3dB)
Scan Type
Linear, Sector, DDF (combination scan available)
Delay Time
0 ~ 5μsec (5nsec step)
Sampling Frequency
100MHz/50MHz/25MHz/12.5MHz
Internal Clock Rate
200MHz
A-scan Display
16 KB
Waveform Presentation
FW, HWP, HWN, RF
PRF
Max. 20 kHz
B-scan Display
Max. 30 Hz
DAC
40 dB / 16 points
Encoder Input
2 axes
Pulse Voltage
96 V / 48 V / 12 V
Weight
2.5 kg
Dimensions (W x D x H)
353 mm × 250 mm × 57 mm
<Testing Overview>
Testing Frequency : 5 MHz, linear and sector scanning
<Test Piece Overview>
Inconel Welding, Thickness :
75 mm
5 mm slit at in depth of ¼ and ¾ and 2 mm slit in depth of ½
<Testing Overview>
Testing Frequency : 5 MHz, linear and sector scanning
Testing Method : Immersion technique
<Test piece Overview>
160 mm square billet
φ2 mm and φ1 mm side hole
• Product definition may vary by country.Please
check with INDES for product and service details.
• Specification subject to change without previous notice.
Copyright
2006 KJTD (USA) Co.,Ltd. All Right Reserved.
